Pettit's Prop Coat, with a high zinc content protects underwater metals against corrosion.Use on transducers and bare metals including steel, stainless steel, cast iron, copper, bronze, galvanized steel, and lead. Bonds to underwater metals and running gear and inhibits corrosion. Use to create a hard, smooth, flat gray finish that self-cleans in service. Can be used above or below the waterline. 16oz. aerosol.Key FeaturesProtects underwater metals against corrosionExtreme adhesion to clean metalsDried paint film contains the highest amount of pure zinc availableFast-dry formula in an easy to use aerosol spray canPhysical DataType: Zinc in modified epoxy baseFinish: Flat Available Colors: Gray Components: 1Curing Mechanism: Solvent releaseCoverage: 10 sq. ft/16 oz. spray canVOC: 60% maxActive Ingredients: Zinc in modified epoxy baseFlash Point: NoneApplicationApplication Method: Aerosol SprayNumber of Coats Recommended: 2 or 3 Do not apply more than three coatsDry Film Thickness/coat: 1.5 milsApplication Temperature Min./Max. Range: 50 F. Min. 90 F. Max.Thinner: Cleanup with 120 Thinner, Model 249961Drying Times (Hours) Drying @50F @70F @90F To recoat 2 1 1/2 To launch 48 24 16 More informationFor detailed application instructions see the Pettit Zinc coat barnacle barrier Data Sheet. NOTE: Manufacturer data sheets are subject to revision. Linked data sheets are believed to be accurate at the time of publication.